

Sweeps, Caps and Liners
When the snow finally melts, a chimney shows how its winter went. Months of daily fires leave a thick coat of soot and creosote, and repeated freezing leaves its mark on mortar and crown. Chimney Sweep Mission uses the quieter spring weeks for Chimney Cleaning and a careful look at the masonry from top to bottom. Gas fireplace cleaning belongs on the same visit, since the burner and glass have just finished a long season of work. Across Mission, an April appointment lets a tired hearth rest properly.
Spring humidity can wake up old residue and send a stale smell into the house. Brushing the flue now removes what the winter built up, before warm, wet air has a chance to stir it.
A gas unit that ran most evenings gathers a film on the glass and dust around the burner ports. A spring cleaning puts it away tidy and shows up any worn part during a quiet time of year.
Good firewood starts long before it reaches the hearth. Stacked on bare ground, wood soaks up moisture from below, and piled against the house, it can invite insects and hide mice close to the walls.
During a visit, we are glad to talk through storage. Raise the stack on pallets or rails, cover the top but leave the sides open to air and keep only a few days of supply inside, in a spot where debris will not drift across the floor.
Properly stored wood burns hotter and cleaner, which means less soot for Chimney Sweep Mission to brush out of the flue. Households in Mission who change their wood pile habits often notice the difference in the first season.


The honeycomb element in some stoves burns smoke a second time. We check it for plugging, cracks and wear.
Steel tubes at the top of a clean-burning firebox feed air that ignites the smoke, and they can warp or burn through.
Ceramic or steel baffles direct the flame path. Cracks or sagging change how the stove burns, so we look closely.
A lever that opens a short path to the flue during lighting must move freely and seal when closed.
Small channels that sweep air across the glass keep it clear, and they clog easily with ash and soot.
A gauge on the pipe or top helps you stay in a comfortable burning range, and we check that yours still reads sensibly.